| Exam Code | 200-125 |
| Exam Name | Cisco Certified Network Associate (CCNA v3.0) |
| Questions | 219 Questions Answers With Explanation |
| Update Date | March 05,2024 |
| Price |
Was : |
Are you ready to take your career to the next level with Cisco Certified Network Associate (CCNA v3.0)? At Prep4Certs, we're dedicated to helping you achieve your goals by providing high-quality 200-125 Dumps and resources for a wide range of certification exams.
At Prep4Certs, we're committed to your success in the Cisco 200-125 exam. Our comprehensive study materials and resources are designed to equip you with the knowledge and skills needed to ace the exam with confidence:
Start Your Certification Journey Today
Whether you're looking to advance your career, expand your skill set, or pursue new opportunities, Prep4Certs is here to support you on your certification journey. Explore our comprehensive study materials, take your exam preparation to the next level, and unlock new possibilities for professional growth and success.
Ready to achieve your certification goals? Begin your journey with Prep4Certs today!
Which two statements about southbound APIs are true? (Choose two)
A. OpenFlow is a southbound API standard.
B. They use HTTP messages to communicate.
C. They communicate with the management place.
D. They enable communication between the controller and SDN applications.
E. They enable communication between the controller and the network device.
Which two protocols does the internet layer in the TCP/IP model encapsulate? (choose two.)
A. ICMP
B. DNS
C. TCP
D. SMTP
Scenario Refer to the topology. Your company has connected the routers R1, R2, and R3 with serial links. R2 and R3 are connected to the switches SW1 and SW2, respectively. SW1 and SW2 are also connected to the routers R4 and R5. The EIGRP routing protocol is configured. You are required to troubleshoot and resolve the EIGRP issues between the various routers. Use the appropriate show commands to troubleshoot the issues. The loopback interfaces on R4 with the IP addresses of 10.4.4.4/32, 10.4.4.5/32, and 10.4.4.6/32 are not appearing in the routing table of R5. Why are the interfaces missing?
A. The interfaces are shutdown, so they are not being advertised.
B. R4 has been incorrectly configured to be in another AS, so it does not peer with R5.
C. Automatic summarization is enabled, so only the 10.0.0.0 network is displayed.
Which action do you take to reset the VTP configuration revision number on a switch in VTP server mode?
A. Change the VTP domain name to any new value, and then change the name back to the original name.
B. Change the VTP mode to transparent, and then changer it to client mode
C. Change the VTP mode to transparent, and then change it back to server mode
Refer to the exhibit Which BGP configuration do you need to apply to router R4 to allow traffic to flow normally on this network?
A. router bgp 1
no synchronization
neighbor 192.168.1.1 remote-as1
neighbor 192.168.2.1remote-as 1
neighbor 192.168.3.1 remote-as 5
no auto-summary
B. router bgp 1
No synchronization
neighbor 192.168.1.1 remote-as 1
neighbor 192.168.2.1 remote-as 1
neighbor 192. 168.2.1ebgp-multihop 4
neighbor 192. 168.3.1remote-as 5
no auto-summary
C. router bgp 1
-multihop 4no synchronization
neighbor 192.168.1.1 remote-as 1
neighbor 192.168.1.1ebgp-multihop 4
neighbor 192.168.2.1remote-as 1
neighbor 192.168.2.1ebgp-multihop 4
neighbor 192.168.3.1remote-as 5
neighbor 192.168.3.1ebgp-multihope
D. router bgp 1
no synchronization
neighbor 192.168.1.1 remote-as 1
neighbor 192.168.1.1ebgp-multihop 4
neighbor 192.168.2.1remote-as 1 neighbor 192.168.2.1ebgp-multihop 4
neighbor 192.168.3.1remote-as 5
no auto-summary
Which prompt does a Cisco switch display when it is running in privileged exec mode?
A. switch>
B. switch#C
C. switch(config)#
Scenario:You are a junior network engineer for a financial company, and the main office network is experiencingnetwork issues. Troubleshoot the network issues.Router R1 connects the main office to the internet, and routers R2 and R3 are internal routers.NAT is enabled on router R1.The routing protocol that is enabled between routers R1, R2 and R3 is RIPv2.R1 sends the default route into RIPv2 for the internal routers to forward internet traffic to R1.You have console access on R1, R2 and R3 devices. Use only show commands to troubleshoot the issues. Examine the DHCP configuration between R2 and R3; R2 is configured as the DHCP server and R3 as the client. What is the reason R3 is not receiving the IP address via DHCP?
A. On R2. The network statement In the DHCP pool configuration is incorrectly configured.
B. On R3. DHCP is not enabled on the interface that is connected to R2.
C. On R2, the interface that is connected to R3 is in shutdown condition.
Which two characteristics are representatives of a link-state routing protocol? (Choose two.)
A. provides common view of entire topology
B. exchanges routing tables for it own routes with neighbors
C. calculates feasible path
D. utilizes event-triggered updates
Which three commands are required to enable NTP authentication on a Cisco router? (Choose three)
A. ntp peer
B. ntp max-associations
C. ntp authenticate
D. ntp trusted-key
Which two facts about configuring EIGRPv6 are true? (Choose two )
A. If you change the interface bandwidth, the EIGRPv4 metric is affected
B. The router ID must be an IPv6 address
C. The variance command for EIGRPv6 is independent of EIGRPv4
D. You must configure neighboring devices with the same ipv6 hello-interval eigrp value
